Zest Violet
| Collection | |
|---|---|
| Flammability Ratings | BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260 |
| Design | |
| Colourway | |
| Colour | |
| Product Type | |
| End Use | |
| Sector | |
| Material | |
| Pattern Type | |
| Width | |
| Width (cm) | |
| Weight (g/m2) | |
| Martindale Abrasion | |
| Wyzenbeek DR | |
| Burst Strength | |
| Technical Features | Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof |
| LRV | |
| FR Territories | |
| Colour Fastness | Colour Fastness to Chlorinated Water – Grade 4-5, Colour Fastness to Sea Water – Grade 4-5, Colour Fastness to Light – Grade 6+, Colour Fastness to Artificial Weathering – Grade 8 |
| Hydrostatic Head | |
| Composition |
Images are for illustration purposes only, different screens will project different shades, please order your free sample to establish appropriateness of colour prior to order placement.
Full Product Details
| Collection | |
|---|---|
| Flammability Ratings | BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260 |
| Design | |
| Colourway | |
| Colour | |
| Product Type | |
| End Use | |
| Sector | |
| Material | |
| Pattern Type | |
| Width | |
| Width (cm) | |
| Weight (g/m2) | |
| Martindale Abrasion | |
| Wyzenbeek DR | |
| Burst Strength | |
| Technical Features | Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof |
| LRV | |
| FR Territories | |
| Colour Fastness | Colour Fastness to Chlorinated Water – Grade 4-5, Colour Fastness to Sea Water – Grade 4-5, Colour Fastness to Light – Grade 6+, Colour Fastness to Artificial Weathering – Grade 8 |
| Hydrostatic Head | |
| Composition |
| Collection | |
|---|---|
| Flammability Ratings | BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260 |
| Design | |
| Colourway | |
| Colour | |
| Product Type | |
| End Use | |
| Sector | |
| Material | |
| Pattern Type | |
| Width | |
| Width (cm) | |
| Weight (g/m2) | |
| Martindale Abrasion | |
| Wyzenbeek DR | |
| Burst Strength | |
| Technical Features | Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof |
| LRV | |
| FR Territories | |
| Colour Fastness | Colour Fastness to Chlorinated Water – Grade 4-5, Colour Fastness to Sea Water – Grade 4-5, Colour Fastness to Light – Grade 6+, Colour Fastness to Artificial Weathering – Grade 8 |
| Hydrostatic Head | |
| Composition |
| Collection | |
|---|---|
| Flammability Ratings | BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260 |
| Design | |
| Colourway | |
| Colour | |
| Product Type | |
| End Use | |
| Sector | |
| Material | |
| Pattern Type | |
| Width | |
| Width (cm) | |
| Weight (g/m2) | |
| Martindale Abrasion | |
| Wyzenbeek DR | |
| Burst Strength | |
| Technical Features | Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof |
| LRV | |
| FR Territories | |
| Colour Fastness | Colour Fastness to Chlorinated Water – Grade 4-5, Colour Fastness to Sea Water – Grade 4-5, Colour Fastness to Light – Grade 6+, Colour Fastness to Artificial Weathering – Grade 8 |
| Hydrostatic Head | |
| Composition |
Soak up spillages as soon as possible with an absorbent dry cloth to prevent staining
If soiling has accumulated use a mild proprietary cleaner (non-alkaline). Take care to remove all soap residues and dry with a clean absorbent cloth
Remove body fluids and extreme soiling immediately (within 15 minutes) with cold water then apply approved infection control protocol. We recommend using Haz-Tabs, Chlor Clean, Acti-Chlor, Clinnell Universal Wipes and Panaz Shield Plus. As the concentration of bleach can vary greatly among proprietary brands we recommend these be avoided but in extreme circumstances, a 10% chlorine bleach solution may be used. Remove product residues and then dry with clean absorbent cloth.
Do not tumble dry
Do not dry clean
Do not fully immerse in water
Do not apply solvents, alcohol or any other chemical cleaners
Do not steam clean - heat seals in stains
Note dyes and pigments from indigo jeans, ball point and felt tip pens may permanently stain
Related Products
Collection Flammability Ratings BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260
Design Colourway Colour Product Type End Use Sector Material Pattern Type Width Width (cm) Weight (g/m2) Martindale Abrasion Wyzenbeek DR Burst Strength Technical Features Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof
LRV FR Territories Colour Fastness Colour Fastness to Chlorinated Water – Grade 4-5, Colour Fastness to Sea Water – Grade 4-5, Colour Fastness to Light – Grade 6+, Colour Fastness to Artificial Weathering – Grade 8
Hydrostatic Head Composition 
Collection Flammability Ratings BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260
Design Colourway Colour Product Type End Use Sector Material Pattern Type Width Width (cm) Weight (g/m2) Martindale Abrasion Wyzenbeek DR Burst Strength Technical Features Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof
LRV FR Territories Hydrostatic Head Composition 
Collection Flammability Ratings BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260
Design Colourway Colour Product Type End Use Sector Material Pattern Type Width Width (cm) Weight (g/m2) Martindale Abrasion Wyzenbeek DR Burst Strength Technical Features Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof
LRV FR Territories Hydrostatic Head Composition 
Collection Flammability Ratings BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260
Design Colourway Colour Product Type End Use Sector Material Pattern Type Width Width (cm) Weight (g/m2) Martindale Abrasion Wyzenbeek DR Burst Strength Technical Features Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof
LRV FR Territories Colour Fastness Colour Fastness to Chlorinated Water – Grade 4-5, Colour Fastness to Sea Water – Grade 4-5, Colour Fastness to Light – Grade 6+, Colour Fastness to Artificial Weathering – Grade 8
Hydrostatic Head Composition 
Collection Flammability Ratings BS 5852 IGN Source 5, BS 7176 Medium Hazard, BS EN 1021 1/2, CAL TB 117, IMO FTP CODE 2010 Part 8, NFPA 260
Design Colourway Colour Product Type End Use Sector Material Pattern Type Width Width (cm) Weight (g/m2) Martindale Abrasion Wyzenbeek DR Burst Strength Technical Features Acryltron, Antimicrobial, ShieldPlus, Stain Resistant, Waterproof
LRV FR Territories Hydrostatic Head Composition
Speak to an Expert
If you’re looking for help finding the right type of commercial fabrics, our team has you covered. Simply get in touch or fill in the form below and we’ll get back to you as soon as possible. No matter your requirements, we can help.
